 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PMP 11 Rectifier Module Description The Power-One PMP 11 rectifier module provides cost-effective power in a high density solution. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 11 is the next evolution in our convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the PCU/PCS controller and varying distribution options. Features * 208/240 VAC input * 24V, 48V, or 60V DC output * Input overvoltage disconnection * Thermal protection * Active load sharing * Hot-swappable * Up to 92% efficient * International standards compliance * Natural convection cooling * Low weight PPS 10 6500 System Shown www.power-one.com PMP 11 Rectifier Module Input Model Input Voltage Current (max.) Soft Start Harmonics Surge Immunity Fuse Connection EMC PMP 10.24A PMP 11.48 PMP 11.60 205-250V AC 10% single phase, (44-66Hz) 185-160V AC at reduced output power <6.8A <7.0A <7.0A Mechanical Dimensions Weight Cooling 62 x 261 x 231mm (2.4 x 10.3 x 9.1in.) 3.1kg (6.8lbs.) Natural convection Reinforced insulation tested at: 4.25 kV DC primary-secondary, 2.12 kV DC primary-ground, 0.75 kV DC secondary ground IP20 Up to 8 modules per shelf <12A peak maximum 220ms EN 61000-3-2 Power Factor >0.99 at max. load EN 61000-4-5 T 8A IEC-320/C14 EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B Insulation Enclosure Mounting Other Technical Data Safety EN 60950 UL 1950 and IEC60950 , Class 1 CSA C22-2 No. 950 Short circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Thermal protection reduces the output power at environmental temperatures above maximum level. Thermal protection with shut down at >55C. Automatic restart.* Input over-voltage disconnection at >275VAC with automatic reset at >260VAC. Green LED Red LED Indications Power ON High output voltage/ shutdown Low voltage/ module failure Output Model Output Voltage Power (max.) Current (max.) Efficiency (at 40-90% Load)* PMP 10.24A 22-28V DC 1000W (25-28V) PMP 11.48 44-56V DC 1100W (50-57.7V DC) PMP 11.60 56-71V DC Protection 1100W (60-71V DC) 43A >88% Vout +/- 1% 23A >91% 18.5A >92% Tolerance Transient Response Load Sharing Ripple Psophometric Connection EMC +/- 5% at load variation 10-90% or 90-10%, recovery time 10ms <5% of nominal current <100mV p-p (BW. 30MHz) <2mV, according to CCITT norms DIN 41612F Radiated EMC EN 61000-6-2, EN 61000-6-4 Environment Audible Noise Operating Temperature* Storage Temperature Red LED <35dBA -25 to +55C up to 2000m -25 to +45C above 2000m -40 to +85C EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Storage: Transport: Operation: ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3 *Average performance for a single module. Note: All specifications are subject to change without notification. 11V0005-034 PMP 11 V3.0 www.power-one.com |
Price & Availability of PMP1148
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |